KenJo Sabers Premium RGB Baselit Manual 1.2

Silverlight, Dawnbreaker, Discipulis, Eclipse, Trinity, Masamune, Resolute, Guardian, with motion control.

Have fun with your KenJo Saber!

Want to stay up to date on the latest offers, giveaways promotions, latest models, technical updates or just see cool lightsaber content? Then be sure to follow us on Facebook and Instagram or sign up for our newsletter! In addition, we frequently raffle off fun prizes on our website and socials!

Would you like to be posted on our page yourself?

- All 'story' posts that tag us will be reposted.

- All 'message' posts that tag us in the photo automatically enter the monthly win action.

Video instructions:

In the following video, all functions of the saber are clearly shown one after another. Open the video in Youtube itself to quickly go to a specific instruction via the description.


Assembly

  1. Remove the plastic cap from the sword blade and then carefully slide it through the top into the handle until it meets the lamp.
  2. Now screw the supplied short flat Allen screws through the screw holes at the top of the handle using the Allen wrench to firmly clamp the sword blade. They do not need to be inserted! The other pointed and blunt screws are spare here you do not need to do anything with them.
  3. The Allen screws should be fixed straight into the handle and without resistance.

When reassembling, make sure that the Allen screws do not block the blade on the inside of the handle.

Charging

Charge the saber for at least two hours before use. Do not turn on the saber while it is charging. A 1A / 5V charger should be used for charging. If the saber has been completely empty charge for at least 4 hours.

Charging with cable: Plug the cable into the charging port. The light ring will flash slowly. When the saber is fully charged the light ring will extinguish or the saber will say "ready". On some legendary sabers the charging port is hidden away this is usually located at the bottom inside the saber.

Charging with separate battery charger: Unscrew the two parts of the saber (leave all screws in place) and remove the battery to insert it into the charger.

Power on

When the saber is in standby (the button lights and the sword blade does not light) press the button on the handle once. If the button does not light the saber is off and the button must be pressed for about three seconds to turn the saber on.

Off

When the saber is on (sword blade is glowing): hold down the glowing button until the saber turns off (about three seconds), the saber now goes into standby mode. Hold the button longer to turn it off completely.

Volumes

Each KenJo Saber has different volumes and a silent/mute mode.

To change volume the saber must be in standby mode. Press and hold the button until the light flashes once, then release. A voice confirmation will now appear.

Repeat this process to change between volume and mute modes.

Operating with button from standby mode.

If the saber is completely off, press and hold the button until a voice acknowledgement follows and/or the luminous button, if present, illuminates. The saber is now in standby mode.

Press and hold the button until the illuminated button flashes the number of times described. No illuminated button? The number of blinks listed are then seconds press.
0 - Briefly press the button to turn the saber on.
1 - Adjust volume (silent / low / high).
2 - Change sound type / character.
3 - Background music on / off.
4 - Flash on clash on / off.

If the saber is not used for more than 20 minutes it will automatically turn off.

Control with button while the saber is on.

When the saber is on the button will have different functions than when the saber is in standby.

Press and hold the button until the illumination flashes the number of times described. No illuminated button? Then the listed number of blinks are the number of seconds of pressing.
0 - Short press for blaster block.
1 - Lightning / force loop.
2 - Color change mode (press button to change)
- 1 - Exit color change mode
4 - Saber back to standby mode.

Press and hold button for approximately 20 seconds to turn saber off completely.

Motion Operation:

Control by motion from standby mode.

1. Turn saber on/off: Point the saber forward, make a wrist rotation:
2: Change sound type: Point the saber upward, hold the button down & make a wrist rotation:
3: Turn background music on / off: Point saber down, hold down & make a wrist rotation:

Motion control when saber is on:

1. Turn saber off / on: Point the saber forward, make a wrist rotation:
2: Switch blade style (steady, pulse, ghost): Point the saber upward, hold the button down & make a wrist rotation:
3: Change color: Point the saber downward, hold the button down & make a wrist rotation:



Troubleshooting

If you have questions or encounter unexpected problems with the KenJo Saber in any form? Look for instructional videos and answers to frequently asked questions at kenjosabers.nl/pages/faqs or kenjosabers.nl/pages/troubleshoot.

Is your question not listed here or do you want to make use of the legal warranty please contact us and we will take care of a quick and adequate service to solve the problem. This can be done via info@kenjosabers.com or via the chat function on www.kenjosabers.com. Please include your order number so we can take a quick look.

Warnings

- The KenJo Saber is not suitable for children under the age of 14. Children over 14 should play with the KenJo Saber under adult supervision.

- Use KenJo Sabers safely and responsibly.

- This product cannot withstand water.

- Do not turn on this product while it is charging.

- Do not disassemble or open this product yourself, otherwise it will void the warranty.

- Do not leave this product on or charging unattended.

- This product is not suitable for use as a permanent light source.

- KenJo Sabers is not liable for any damage and/or injury caused by not following warnings.

- Do not expose the saber to open flame or indirect heat.

- Contains small parts, keep away from children and store safely due to choking hazard.

- This product should not be placed in the trash and should be recycled.

- Do not leave the saber on unattended.

- This product cannot be washed or microwaved.

- KenJo Sabers is not liable for any damage and/or injury caused by not following warnings.

- Do not use (fast) chargers with an output higher than 1A/5V.




FAQ: Frequently Asked Questions

On this page you will find links to online manuals and instructional videos for your saber.

https://kenjosabers.nl/pages/handleidingen-kenjo-sabers-pagina

If you have problems with your KenJo Saber we would like to solve it for you. On the troubleshoot page we answer the most frequently asked questions or common complications with corresponding solutions. We recommend that you review this troubleshoot page first. Does this not solve the problem? Please contact us by chat or email. Always mention your order number so we can take a quick look.

Base lit models feature a bright 12 watt bulb in the handle. This shines into the sword and causes the lightsaber to light up.

Neopixel and Proffie have a sword which is equipped with a double-sided LED strip along the entire length of the inside. This ensures that the light is much brighter than a base lit variant and also offers more lighting effect possibilities.

All soundboard types come with preset sounds and colors. The proffie variant comes with a 16GB SD card. On various forums you can find many sound effects and light effects to upload.

Below is an overview of the different soundboards offered by KenJo Sabers.

For a more detailed explanation of the various functions, we recommend reading this page first,

Most orders ship the same day! For current and complete shipping policies, please visit our shipping policies page: https://kenjosabers.nl/pages/verzendbeleid

The operation of your saber varies by soundboard type and in some cases also minimally between certain models. On this page you can find the appropriate manual based on your saber or soundboard type. In many cases the explanation is extended with video for extra explanation and demonstration. https://kenjosabers.nl/pages/handleiding-kenjo-sabers

Remove the black or clear cap from the flat side of the saber. Then carefully slide the blade/sword or plug into the handle until it meets the bulb. With a neopixel model, it is important that the pins are pushed down sufficiently. Make sure that the Allen screws do not block the blade on the inside of the handle. Then use the supplied Allen screws and Allen wrench to tighten the blade firmly into the handle. Also watch the instructional video on the troubleshoot page here

You bet! All of our swords are made of durable polycarbonate developed for lightsaber versus lightsaber duels. Always use common sense and be careful. We recommend wearing protective clothing and making sure you have enough space so there is no damage to the environment or other people.

Please note that RGB base lit lightsabers are best suited for dueling. Other soundboard type lightsabers have an LED strip in the sword which makes them heavier and more fragile. These models can also be dueled with, but we recommend soft to medium dueling to avoid damage.

KenJo Sabers come standard with 12 different preset colors. The colors can be easily changed by using the button on the lightsaber. It is also possible to choose your own color by letting the lightsaber slowly change color. Exact instructions can be found in the manual which comes with each lightsaber. Some models have different colors of handles / hilts. On the product page you can see in which color a lightsaber is available. If the model you want is sold out, we do not have it in stock. Would you still like to buy it or do you have another wish? If so, please let us know. It is often possible to facilitate a saber specifically for you.

I have seen a lightsaber replica of a Star Wars character somewhere else. Or, I'm looking for a specific lightsaber.

Each lightsaber from KenJo Sabers comes with a manual. This contains all the instructions on how the lightsaber works! Online you can find the most recent version https://kenjosabers.nl/pages/handleiding-kenjo-sabers. Please note. Features may be added. If your saber has been around for a while, there may be more features described than your saber has.

Each lightsaber from KenJo Sabers comes with a manual. This contains all the instructions on how the lightsaber works! Online you can find the most recent version https://kenjosabers.nl/pages/handleiding-kenjo-sabers. Please note. Features may be added. Has your saber been around for a while? Then there may be more features described than your saber has. If you have a premium neopixel saber then you can update it yourself.

The USB flash drive has an input for a Micro SD card. This card is inside the Premium Neopixel board. It is possible to update the board this way.

Each lightsaber from KenJo Sabers comes with a manual. This contains all the instructions on how the lightsaber works! Online you can find the most recent version https://kenjosabers.nl/pages/handleiding-kenjo-sabers. The Proffie soundboard allows you to set your own effects, sound types and other effects. The possibilities are endless. Also check out https://therebelarmory.com/ for information and settings for your Proffie board. Please note that because the Proffie 2.2 soundboard is fully customizable it does require a bit more time, your own research and computer skills to master. Plenty of tutorials can be found on various forums and Youtube.

To create a dualsaber, you need two lightsabers that are designated "dualsaber ready" and a connector ring. To connect both sabers, unscrew the bottom of both lightsabers. The connector ring can now be connected to both lightsabers through the thread.

How nice of you to place an order! If there are ongoing discount promotions, please pay close attention to whether the terms for this promotion apply to your order. Check this page for clear instructions on how to use a discount code. Still have questions? Let us know!

There are various offers, promotions, discount codes and competitions active. For a current overview we refer to this overview.

For more information check out our full return policy: https://kenjosabers.nl/policies/refund-policy

Always report your return in advance via email or chat. Mention the order number in the message and the reason for the return. So you can be helped quickly.

Do you prefer a different saber or soundboard afterwards? Let us know in the message so we can quickly exchange your return shipment.

Always include your unique order number on or in the shipment so we can track it. Failure to do so may result in your order being lost or refunds being delayed.

Always report your return in advance via email or chat. We will find a solution together and share return instructions.

Send us an email at info@kenjosabers.nlofopen a chat on the website. We usually respond immediately or within minutes. KenJo Sabers always tries to respond within 48 hours on weekdays.

At KenJo Sabers, you can checkout using the following payment methods:

- Ideal

- Klarna

- Klarna pay later

- Visa

- PayPal

- Belfius

- Sofort

- Sepa bank transfer

- Credit card

- Przelewy24

- EPS

- KBC/CBC

- GiroPay

I don't see my payment method:

From your shopping cart, go to the payment page by clicking on "checkout". Fill in the requested information and at the bottom of the page click "Continue to Shipping" and then "Continue to Payment" to display all payment options.